| MANUFACTURING - Pattern Data |
|
230-B Disamatic Molding Line |
||
| Casting Weight |
60 pounds max |
Give us a chance to review the design for weight
reduction. |
| Total Mold Weight |
110 pounds max |
This includes all gating, bath tub, and risers. |
| Plate Size |
21.0" x 25.5" |
Standard 230-B Pattern Plate |
| Working Area |
14 x 22" |
This working area also includes all riser and
gating to feed the casting. |
| Total Pattern Height |
13.9" |
This height includes 2 Disa plates, metal plates
are 1" thick, height out of the plate |
| Total Amount Of Offset |
3.5" |
We have equipment to make 3.5" offset,
plastic plates with metal backing plate. |
| Total Core Set |
10.63" |
This will include the 2.66 and 5.12 core mask. |
| Minimum Wall Thickness |
0.187" |
In localized areas |
| Machine stock |
.060" |
Typical - Plus draft where applicable |
| Draft Angles |
5 degrees 3 degrees |
In all inside pockets All outside features |
| Tolerancing |
+/- .030" up to 3" + .008" for every inch over 3". |
Tighter tolerances may be held in localized
areas with pattern adjustments. |
|
Core Machines |
||
| SCB-10 |
15" X 10" X 3"/3" |
Hot Box - Shell machine cores ( threaded core,
tight tolerance core) |
| REDFORD 43 |
13" X 11" |
Hot Box - Shell and warm box cores |
| REDFORD 16 |
17" X 16" |
Hot Box - Warm box cores ( big block or chunky
cores) |
| LAEMPE LL10 |
17" X 13" X 13" |
Cold Box - Isocure cores, 3 part core boxes,
loose pieces, faster running machine |
Home | History | Manufacturing | Pattern Data | Equipment List & Capabilities | Products | Technical | Value Added | Contact
1501 Cherry St. . Erie, PA 16502 . Phone (814) 454-2461 . Fax (814) 454-1397